Deep Ultraviolet LED 275nm 280nm SMD6868 18-24MW UVC Light

• LED Packaging Type: Chip
• Beam Angle: 60 or 140
• Emitting Color: Purple
• Base Material: Ceramics
• Life: 3000-5000h
• Certification: RoHS
• Model NO.: TY-275nm-10-16mW
• Voltage: 5-7V
• Current: 150mA
• Transport Package: Carton
• Specification: 6.8*6.8mm
• Trademark: UVTaoYuan
• Origin: China
• Production Capacity: 5000PCS/Year

Product Description

1.UVC 275-280nm 10-16mW chip Integrated package Performance parameters 150mA:

Parameter	Symbol	Unit	Min.	Typ.	Max.
Peak Wavelength	λp	nm	270	-	280
Radiant Flux	φe	mW	18	20	24
Forward Voltage	VF	V	5	-	7
Spectrum Half Width	Δλ	nm		10
View Angle	2θ½	°		120
Thermal Resistance	RJ-b	ºC/W		53

Note
[1] Peak Wavelength Tolerance ± 3.5nm (Peak Wavelength Tolerance ± 3.5nm)
[2] Radiant Flux Measurement tolerance ±10%
[3] Forward Voltage Tolerance ± 10%
[4] RJ-b is thermal resistance from junction to case.
[5] All parameters are measured by TAOYUAN

 

Instructions

1. LED storage: suggest to sealed stock in under the temperature of 10ºC-55ºC,humidity of 30%-65%.In order to keep a good quality,

please use it within 1 year after the prodcution date; and use it out within 28days after open the package.

2. When taking or touch the LED, pls make sure to wear the gloves. Seal the package in time in orde to avoid the pin oxidation. When openning

the package, need to use the weezers clamped on both sides of LED in order not to touch the face of the LED.

3. Installation: This process is mainly to protect the static electricity.
a. Check if the grounding wire of the machine equipment is normal before production;
b. Check if the static ring is normal, check static metal and human skin contact closely;
c. Check if the workerswear anti-static gloves;
d. Check if the working table is paved with electrostatic rubber cloth, and the rubber cloth is connected to each other.

4.  It is recommended to use low temperature solder paste for reflow.

5. It is suggested that a grounding circuit should be used in the design of PCB. Pay special attention to the usage environment of LED: the temperature is between

-30ºC to 55ºC, and the humidity is between 65%. Otherwise, the LED will be broken by electrostatic and high current breakdown.